1. Washing Machine Not Starting
- Ensure the power supply is functional and the plug is securely connected.
- Check if the circuit breaker has tripped.
- Inspect the door lock or lid switch for malfunctions.
- Try resetting the machine by unplugging it for a few minutes.
2. Water Not Draining Properly
- Remove blockages from the drain pump filter.
- Ensure the drain hose is not twisted or clogged.
- Inspect the drain pump motor for any faults.
- Verify that the drainage pipe is installed at the correct height.
3. Washing Machine Making Strange Noises
- Check for objects stuck inside the drum.
- Ensure the washing machine is balanced on a flat surface.
- Inspect bearings, suspension rods, and shock absorbers.
- Tighten any loose bolts or internal components.
4. The Washing Machine Vibrating Excessively
- Ensure the machine is placed on an even surface.
- Distribute clothes evenly inside the drum.
- Check and replace worn-out suspension springs.
- Inspect motor mounts and secure any loose connections.
5. Washing Machine Not Spinning Properly
- Confirm the spin cycle settings are correct.
- Inspect the drive belt and motor coupling for wear and tear.
- Ensure the lid switch or door lock is functioning.
6. Water Leakage from the Washing Machine
- Inspect the water inlet and drain hoses for leaks.
- Ensure the detergent drawer is clean and free from clogs.
- Check the rubber door seal for dirt buildup & damage.
- Inspect the water pump for any visible leaks.
7. Clothes Coming Out Dirty or Soapy
- Avoid overloading the washing machine.
- Use the recommended detergent type and quantity.
- Check if the water inlet valve is functioning properly.
- Ensure the drum rotates at the correct speed.
8. Washing Machine Stopping Mid-Cycle
- Check for power supply interruptions or fluctuations.
- Inspect the control board and timer for possible faults.
- Ensure the washing machine lid is securely closed.
- Restart the machine after a reset.
9. Bad Odor from the Washing Machine
- Run a hot water cycle with a cleaning solution.
- Regularly clean the detergent tray and rubber seal.
- Keep the machine door open after each use for ventilation.
10. Error Codes Appearing on the Display
- Refer to the user manual to understand error messages.
- Try resetting the machine by unplugging it.
- Inspect sensors & wiring for possible issues.
- Contact HouseTriangle for expert washing machine repairs.